Share:
Description of Rapid Rate Temperature Cycling Chambers
Rapid Rate Temperature Cycling Chamber, also known as rapid rate thermal cycling chamber, is used to test the performance of products in rapid temperature change conditions.
The rapid rate thermal cycling chamber is mainly applied in aerospace products, information electronic instrumentation, materials, electrical, electronic products, and various electronic components, etc.
Test standards: It meets GB/T2423.1-2001GB/T2423.2-2001GB/T2423.4-2001 etc test standards.
As one of the most professional temperature cycling chamber manufacturers in China, Meridian has a lot of experience in rapid rate thermal cycling chamber production. With years of production and practice, Meridian has formed its own advantages different from other temperature cycling chamber manufacturers. We can provide you with high-quality temperature cycling chambers. If you are looking for a reliable rapid rate thermal cycling chamber supplier, please feel free to contact us!
Parameter of Rapid Rate Temperature Cycling Chamber
| Model | MICT-150Y | |
| Inner chamber size(mm) |
500*600*500 (W*H*D) |
|
| Exterior chamber size (cm) | Depends on chamber design | |
| Testing temperature range |
-40℃～150℃ |
|
| Rapid-rate temperature range |
-40℃～+85℃ |
|
| Temperature gradient |
7℃/ min (linear or non-linear,empty loading),customization is available |
|
| Temp. fluctuation | ±0.3℃ | |
| Temp. uniformity | ±1.5℃(empty loading after stabilizing for 30 mins) | |
| Temp. resolution | 0.01℃ | |
| Exterior chamber material | Cold-rolled plate + Powder coating | |
| Interior chamber material | SUS#304 Stainless steel | |
| Insulation material | PU+ fiberglass wool | |
| Circulation system | Centrifugal fan air circulation system | |
| Heating system | SUS# Stainless steel high-speed heater | |
| Refrigeration system | Compressor + Finned evaporator + Air(Water) cooled condenser | |
| Controlling system | Touch screen controller+SSR+PID | |
| Other components | Vacuum glass observation window | |
| Test hole (50mm) | ||
| Control status indicator | ||
| Interior light | ||
| Compartment shelf (2 freely adjustable) | ||
| Safety protection device | Overheat protection circuit breaker | |
| Compressor overload protection | ||
| Control system overload protection | ||
| Overload indicator | ||
| Phase sequence protection | ||
| High voltage and low voltage protection | ||
| Over-temperature protection | ||
| Fan overcurrent protection | ||
| Power supply | AC 3Ψ380V 60/50Hz | |
| Customization service | Non-standard or special requirements are all welcome | |
Inquiry - Rapid Rate Temperature Cycling Test Chamber
